Nice WDT. Super-fine wires do a great job, I like the handle shape. Didn’t see it listed as a feature but there is a magnet inside the handle!

Makes the biggest difference on my espresso shots, i use a regular distributor after then the tamper

This tool is helpful in airating and distributing grounds after dispensing and before tamping. In all honesty, you do not need the best brand of this tool to get the job done but I do like this one. It is magnetic, so you can attach it to the side of your machine for ease of use. It is easy to clean and to use and has held up well. My one complaint is that one of the wires did bend and is mishapen now and I have yet to figure out how to fix it. It does come with extra wires but I will have to figure out how to replace one. I'd say with this WDT tool specifically, you are paying for the brand more than the tool itself, but I still like it!

Looks nice and works well. I think the cost is high and assembly was difficult. When it arrives you will need to assemble by inserting the needles into the base - there were no instructions I could find and it was kind of a pain.

I use it daily! well made and gets the WDT job done!

Is a must really cheap and makes a difference on your coffee. Plus it has a magnet so it’s easy to store

If you own an espresso machine and a coffee grinder, this is a must have. I think this was a fair price, considering most others online were more than double the cost. It also come with replacement needles in case you accidentally damage some of the existing ones.

This WDT tool makes a significant difference when I extract my espresso shot. It helps me break up the clumps and ensure an even extraction.

Sturdy tool to break up your espresso grounds. Possibly a bit pricey for what it does and due to the fact that sometimes the needles become misaligned. They do provide you with extra though in case anything happens and each needle can be individually changed out.

Worked beautifully. Exactly as advertised. Came with extra needles which is a nice touch. It’s been a game changer for my espresso.

The product is fine. It looks good and does what it should. I just wish the magnet was stronger to hold it on the side of the machine and I think for the price it should be. IMO.

The media could not be loaded.

This WDT tool is well-designed and works perfectly for breaking up clumps and evenly distributing grounds in the portafilter. The needles have the right thickness to move through the coffee without creating channels, and the fit is ideal for my 53.3mm basket. It feels durable, easy to use, and makes a noticeable difference in shot consistency. For the price, it’s excellent value for money and a must-have tool for espresso prep.

Works well. I feel like for 20 bucks it should come with some type of case/holder

Works great. Declumps and levels the output of my Mazzer Mini. Bottomless portafilter and espresso flaver confirm no channelling most all the time-95% or better. I store it in a shot glass; effective, if inelegant.

I saw that Normcore has at least two versions of the wdt tool and I thought I was buying one with straight pins. That is what is shown in the picture. However I got the version where the pins flair outwards. The thing still works well and is built well, so it gets five stars. I just point out that the picture is not accurate because, for my setup, it would have been easier to store a took with straight pins.

I am just getting into espresso machines, and gear and coffee etc. I decided to spend the extra money and go all in on normcore coffee accessories and they do not disappoint! All their products are incredibly high quality and they hooked me from the beginning.

I have a Breville Barista Touch and used the included portafilter. Dialed in my shots over time with good quality coffee and filtered water. Decided to get a bottomless portafilter and this Normcore WDT. After about 8 shots I was able to dial in and get way better shots. My grind is set at 13, time for grinding is 20 seconds for 20g of coffee. Pull a shot for 31 seconds and I get 38.5-39.2g out. Nice shot, golden crema with no channeling (granted I use a Normcore WDT and Normcore spring loaded tamper). Shots taste better than before even using the same beans. Also used IMS basket and bottomless portafilter which allows me to see how the shot is pulling and its very useful. I never would imagine how important puck prep is, but it is. I would buy again.

Have only used the WDT a few times, and I do like it. The disappointment comes in the lack of a stand. The tool comes with a little magnetic plate, which might work for some people, and seems strong, but then I have to find a spot for it stick from, and I don't want it to awkwardly to out or up, I would rather have it in a stand so it can be tucked away without worry of damaging the wires.

I bought this to upgrade from my janky cork. This functioned best with the middle 9th needle removed. It feels nice and sturdy in the hand. But it’s a good tool that is tainted by 2 issues. 1 - the needles would do better if they were slightly angled out. 2 - the needles are woefully weak. I bent the installed needles to get that effect. Big mistake. They twist as you WDT, so the moment you start doing WDT all those needles twist out of alignment. My bad. I put in all new needles (thankfully they give you extras). I did not bend any by hand, but simply using the tool bends the needles! So all my needles are out of alignment and does a horrible job. They need sturdier needles. I like the thickness but the needles are way too weak. Now I have a $35 tool that is not much better than my janky 4 needle wine cork. If I can get acupuncture replacement needles I’ll be okay. The handle is good. I put my tool on the magnet every time after use. I’m pretty disappointed